Finite Volume Method (FVM)
To understand the field of Finite Volume Method and in particular the Computational Fluid Dynamics (CFD) of the fluid flow are very important strategies to support teaching at master level. This module contained some explanations of the basic ideas which helpful of students to understand the simulation .
Using the Finite Volume Method with thermal conditions such as conduction (Diffusion), Convection and Radiation , is a necessary process which is able to analyze of system of fluid flow under high temperature including the geometry of system.
In addition, the CFD can use to simulate any phenomenon depending in the Transport equation including the control volume taking into account the boundary conditions such as the thermal aspect and the dimensions 1D or 2D or 3D.
This module has gone hand in hand with official program, where I based on the reference (1)as principal reference which has been written by excellent way.
Finally, this module is the principal key to study the complex phenomena such as aerodynamics and hydrodynamics for master students of mechanical engineering.
- معلم: MERIEM BENZIANE Madjid
Programmation Avancée (MATLAB)
To understand the field of programming specially MATLAB Code is very important tool to know the smart technology which focused on the structures of control.
The MATLAB code is used in the fields of scientific research, it allows to perform the numerical simulations based on algorithms, taking into account the types of functions.
Matlab is based on a numerical hardware calculation, it can also be used to solve differential equations, partial differential equations, linear or nonlinear systems, ..., etc.
MATLAB consists of numerous functions, numerical calculation, and graphic visualization such as the display of 2D or 3D curves according to the syntax commands taking into account the field of calculation.
Knowing that I based on the reference (1) as principal reference which has been written by good way.
Finally, this module is major tool specified for master students of mechanical engineering to use the MATLAB program in their graduation projects which depend usually on the algorithm and structure of program .
- معلم: MERIEM BENZIANE Madjid
TP de Méthode des Volumes Finis
The Computational Fluid Dynamics (CFD) are very interesting to predict the behavior of fluid flow. This module is divided into two parts Gambit and Fluent.
Firstly we start by Gambit which is a technique to create the geometry of project and then make a mesh. In addition, There are two kinds of mesh: firstly structural mesh and secondly non structural mesh with Cartesian or Cylinder coordinates.
Secondly, to continue the numerical steps, we use the Fluent that bases on a many factor such the check of the geometry dimensions, boundary conditions, nature of liquid (Newtonian or non Newtonian , interaction fluid-fluid (chemical reactions) and displaying of results on 2D or 3D .
In addition, the CFD can use to simulate any phenomenon depending in the fluid flow including the control volume taking into account the boundary conditions such as the thermal aspect, pressure and velocity.
This module has gone hand in hand with official program, where I based on the reference "GAMBIT 2.2 Tutorial Guide" as principal reference which contains lots of practical and scientific advices .
Finally, this module is for master students of mechanical engineering.
- معلم: MERIEM BENZIANE Madjid